GOLF PRIDE PRO ONLY PUTTER GRIP / BLUE STAR 81CC

Golf Pride have developed an all-new putter grip available in three different sizes. The three grips are colour coded, and each represents something different.

Golf Pride Pro Only Putter Grip – Features

Red Star grip is a modern horseshoe shape with an arched paddle in front for thumb placement. There’s a slight pistol kick on the back of the grip for hand placement on the heel. It weighs 74.5 grams and is 72cc.
Blue Star has an angled profile with a wider flat paddle in the front while boasting an angled back shape for more comfortable gripping with the fingers. It weighs 82 grams and is slightly bigger at 81cc.
Green Star grip is more oval-shaped with an arched paddle in the front for thumb placement. The upper hand area is more flared back for comfort and positioning. It’s the biggest grip at 88cc and weighs 86.5 grams.
Authorised Golf Pride Retailer

+FREE GRIP TAPE INCLUDED WITH EACH GRIP

STEP-BY-STEP REGRIPPING INSTRUCTIONS

The following supplies are needed:

1.PRO-GRIP DOUBLE SIDED GRIP TAPE
2.STANLEY KNIFE / BLADE
3.NEW GOLF GRIP
4.SOLVENT WHITE SPIRITS
5.RUBBER GLOVES TO PROTECT HANDS
6. TOWEL / CLOTH

STEP 1 – Remove the old grip with a Stanley blade Be sure to cut away from
yourself at all times. Peel or scrape off the old grip and grip tape.
Using a cloth and Mineral Spirits Grip Solvent, clean off the residue.
*If removing a grip from a graphite shaft be careful to avoid damage to the shaft

STEP 2 – Wrap your PRO-GRIP double sided grip tape in a spiral formation from
the top of the shaft to the point where the bottom of the grip will be on the shaft.
Remove the tape backing and cover the end of the shaft with extra tape.

STEP 3 – Cover the vent hole in the butt end with your finger or golf tee, and pour
a generous portion of Solvent such as white spirits inside the new grip. Close the
open end of the grip with your hand and shake to cover the entire inside of the grip.

STEP 4 – Pour the excess Mineral Spirits Grip Solvent (through the vent hole)
over the entire length of the two-sided tape. Apply generously. Use a tray to
catch excess Mineral Spirits Grip Solvent for use on other clubs.

STEP 5 – Place the grip over the shaft butt and Push the grip entirely onto
the club. Be sure to push it all the way down and align the grip as desired.
This must be done while the grip tape is still wet.

STEP 6 – Allow grips to dry for several hours before playing.