GOLF PRIDE PRO ONLY CORD PUTTER GRIP / BLUE STAR 81CC

The Tour Inspired Golf Pride Pro Only Cord Putter Grips feature a brushed cotton cord for Golf Pride’s firmest, most responsive putter grips ever.  Available in 3 shapes The Red Star Grip has a Tour-preferred pistol shape with an arched paddle front for thumb placement and added precision. The Blue Star grip has an angled back shape to lock in hand placement and a wider paddle front for consistent thumb positioning. & The Green Star grip has a rounded, oval back shape and a slightly arched paddle front for comfortable hand positioning and precise thumb placement.
Golf Pride Pro Only Putter Grips – Features: 

Brushed cotton cord finish.
Firmer, more responsive feel.
Available in 3 Tour Inspired shapes.
Red Star 72cc – Classic Shape
Blue Star 81cc – Midsize Paddle
Green Star 88cc – Oversized Paddle
Authorised Golf Pride Retailer

+FREE GRIP TAPE INCLUDED WITH EACH GRIP

STEP-BY-STEP REGRIPPING INSTRUCTIONS

The following supplies are needed:

1.PRO-GRIP DOUBLE SIDED GRIP TAPE
2.STANLEY KNIFE / BLADE
3.NEW GOLF GRIP
4.SOLVENT WHITE SPIRITS
5.RUBBER GLOVES TO PROTECT HANDS
6. TOWEL / CLOTH

STEP 1 – Remove the old grip with a Stanley blade Be sure to cut away from
yourself at all times. Peel or scrape off the old grip and grip tape.
Using a cloth and Mineral Spirits Grip Solvent, clean off the residue.
*If removing a grip from a graphite shaft be careful to avoid damage to the shaft

STEP 2 – Wrap your PRO-GRIP double sided grip tape in a spiral formation from
the top of the shaft to the point where the bottom of the grip will be on the shaft.
Remove the tape backing and cover the end of the shaft with extra tape.

STEP 3 – Cover the vent hole in the butt end with your finger or golf tee, and pour
a generous portion of Solvent such as white spirits inside the new grip. Close the
open end of the grip with your hand and shake to cover the entire inside of the grip.

STEP 4 – Pour the excess Mineral Spirits Grip Solvent (through the vent hole)
over the entire length of the two-sided tape. Apply generously. Use a tray to
catch excess Mineral Spirits Grip Solvent for use on other clubs.

STEP 5 – Place the grip over the shaft butt and Push the grip entirely onto
the club. Be sure to push it all the way down and align the grip as desired.
This must be done while the grip tape is still wet.

STEP 6 – Allow grips to dry for several hours before playing.