JUMBOMAX COMFORT WRAP GOLF GRIPS – BLACK / WHITE

Golfers are always on the lookout for the best new golf clubs. But when it comes to golf grips, most golfers are still using the grips they played 5, 10, or even 15 years ago. And that’s because golf grips have remained essentially unchanged over the years. JumboMax grips are different… first and foremost because they’re bigger. Our claim is simple. Once you try JumboMax, you’ll never go back to “skinny grips.”

The JumboMax Comfort Wrap Golf Grip offers elevated comfort and tackiness without compromising the stability golfers need to play their best. The Comfort Wrap offers maximum clubface control with Stability Core™, our twist-resistant grip foundation that delivers tour-level performance at any speed.

JumboMax Comfort Wrap Golf Grip – Features:

Ergonomic shape allows for more practice and less pain
Counter-balanced design helps golfers smooth out their swing
Promotes light, even grip pressure which creates faster clubhead speed
Super-oversized profile which improves clubface awareness and control
Twist-Resistant Stability Core™ offering maximum performance in the rough
The comfy one: JumboMax softest, most comfortable, and most shock-absorbing grip
Multibuy Discounts 5% Off 2 Grips – 10% Off 3 or more Grips
Authorised JumboMax Retailer

STEP-BY-STEP REGRIPPING INSTRUCTIONS
The following supplies are needed:
1.PRO-GRIP DOUBLE SIDED GRIP TAPE
2.STANLEY KNIFE / BLADE
3.NEW GOLF GRIP
4.SOLVENT WHITE SPIRITS
5.RUBBER GLOVES TO PROTECT HANDS
6. TOWEL / CLOTH
STEP 1 – Remove the old grip with a Stanley blade Be sure to cut away from
yourself at all times. Peel or scrape off the old grip and grip tape.
Using a cloth and Mineral Spirits Grip Solvent, clean off the residue.
*If removing a grip from a graphite shaft be careful to avoid damage to the shaft
STEP 2 – Wrap your PRO-GRIP double sided grip tape in a spiral formation from
the top of the shaft to the point where the bottom of the grip will be on the shaft.
Remove the tape backing and cover the end of the shaft with extra tape.
STEP 3 – Cover the vent hole in the butt end with your finger or golf tee, and pour
a generous portion of Solvent such as white spirits inside the new grip. Close the
open end of the grip with your hand and shake to cover the entire inside of the grip.
STEP 4 – Pour the excess Mineral Spirits Grip Solvent (through the vent hole)
over the entire length of the two-sided tape. Apply generously. Use a tray to
catch excess Mineral Spirits Grip Solvent for use on other clubs.
STEP 5 – Place the grip over the shaft butt and Push the grip entirely onto
the club. Be sure to push it all the way down and align the grip as desired.
This must be done while the grip tape is still wet.
STEP 6 – Allow grips to dry for several hours before playing.