P2 TOUCH TOUR PUTTER GRIP – WHITE

The Touch Tour is a more traditional pistol style grip that merges a pistol shaped top section with a minimal taper lower down the grip. The more pronounced arc of the pistol shape helps lock in the position of the top hand even further when combined with the patented P2 off-centre shaft design.

The P2 Touch Tour grip through its shape and firm tacky texture is designed to improve the efficiency of your hand and wrist positions throughout the stroke while giving you the ultimate in putter face control. The underside of the grip has a subtly rounded spine which allows you to feel the exact placement of the grip in your fingers. Our grips are designed, independently tested and proven to improve your accuracy through striking putts from the sweetspot of the putter face more often.

P2 Touch Tour Putter Grip – Features: 

Genuine P2 Putter grip

Patented bottom shaft housing design

Lifts your hands & locks your wrists

Increases control over putter head

Premium Quality PU Leather materials

Available in 5 Classic colour options
Authorised P2 Retailer

+FREE GRIP TAPE INCLUDED WITH EACH GRIP

STEP-BY-STEP REGRIPPING INSTRUCTIONS

The following supplies are needed:

1.PRO-GRIP DOUBLE SIDED GRIP TAPE
2.STANLEY KNIFE / BLADE
3.NEW GOLF GRIP
4.SOLVENT WHITE SPIRITS
5.RUBBER GLOVES TO PROTECT HANDS
6. TOWEL / CLOTH

STEP 1 – Remove the old grip with a Stanley blade Be sure to cut away from
yourself at all times. Peel or scrape off the old grip and grip tape.
Using a cloth and Mineral Spirits Grip Solvent, clean off the residue.
*If removing a grip from a graphite shaft be careful to avoid damage to the shaft

STEP 2 – Wrap your PRO-GRIP double sided grip tape in a spiral formation from
the top of the shaft to the point where the bottom of the grip will be on the shaft.
Remove the tape backing and cover the end of the shaft with extra tape.

STEP 3 – Cover the vent hole in the butt end with your finger or golf tee, and pour
a generous portion of Solvent such as white spirits inside the new grip. Close the
open end of the grip with your hand and shake to cover the entire inside of the grip.

STEP 4 – Pour the excess Mineral Spirits Grip Solvent (through the vent hole)
over the entire length of the two-sided tape. Apply generously. Use a tray to
catch excess Mineral Spirits Grip Solvent for use on other clubs.

STEP 5 – Place the grip over the shaft butt and Push the grip entirely onto
the club. Be sure to push it all the way down and align the grip as desired.
This must be done while the grip tape is still wet.

STEP 6 – Allow grips to dry for several hours before playing.